§ 84-17. Permitted signs by zoning district.

A. 

Sign types. The following table indicates the sign types permitted within the Village's zoning districts, as established in Chapter 112 of the Village of Williamsville Code.

(1) 

A "•" indicates that the sign type is permitted and may be illuminated.

(2) 

A "○" indicates that the sign type is permitted but may not be illuminated.

(3) 

A "-" indicates that the sign type is not permitted.

Table 84-17A: Sign Types Permitted by Zoning District.
Zoning Districts
Sign Type	R-1, R-2, R-3	R-3M	NMU, MU	M-1	Requirements
Max number of signs	1 sign per use	1 sign per use	2 sign per use	2 sign per use	As permitted
A-Frame	-	○	○	○	§ 84-18A
Awning	-	-	○	○	§ 84-18B
Ground	○	○	•	•	§ 84-18C
Marquee	-	-	•	-	Determined by Planning Board
Painted	-	-	•	•	§ 84-18H
Pole	-	-	•	•	§ 84-18D
Projecting	-	○	•	•	§ 84-18E
Suspended	-	-	○	-	§ 84-18F
Temporary	○	○	○	○	§ 84-18G
Wall	○	○	•	•	§ 84-18H
Window	-	○	○	○	§ 84-18I

NOTES:
	A-frame, window, and temporary signs shall not be included in the count of total allotted signage for any one use.

B. 

Additional signage for developments. Due to the unique identification needs of residential and multitenant commercial developments, additional signage may be permitted in accordance with Table 84-17B below. All signs must be in conformance with § 84-18, where applicable.

Table 84-17B: Additional Development Signage
	Number	Type
Residential development	1 per entrance	Ground sign, max height 4 feet and max area 24 square feet
Multitenant commercial development
Per tenant	2	As permitted
Per lot	1	Ground sign, max height 10 feet and max area 32 square feet
Multistory, multitenant commercial or mixed-use building
First floor	1 per tenant	As permitted
Upper floor	1 building identification sign	Special Planning Board approval required
Corner buildings	1 additional	As permitted, must be identical to signage on primary facade

NOTES:
	Shall only apply to entrance points from public streets.
	Freestanding signs may not be duplicated. Additional signage must be located on facade.